苏州威利诺机械设备有限公司
联系人：王经理
手机：15906136866
电话：0512-68136800
传真：0512-68136800
地址：吴中区横泾镇兴巷路2-1号
中文
断桥铝门窗设备单轴仿形铣床怎样使用？
2017-10-10
点击数：1318
1、操作人员未经过培训，并且合格者不得操作本设备。
1, the operator has not been trained, and qualified personnel shall not operate the equipment.
2、操作人员在操作本设备前应穿戴好劳保护品，袖口扎紧。长发需扎到工作帽内。严禁戴手套作业，严禁佩戴各种影响操作的饰品。
2, the operator should wear PPE in the operation of this equipment, cuffs fastened. Long hair needs to be stuck into the work cap. Wearing gloves is strictly prohibited. Wearing all kinds of jewelry is strictly prohibited.
3、开机前认真检查设备各部位，严禁有妨碍操作的物品，工件必须固定牢固。
3, before starting, carefully check the parts of the equipment, are strictly prohibited to impede the operation of the goods, the workpiece must be fixed firmly.
5、设备运转中操作人员不得离开设备，不得靠近或触摸高速旋转的主轴、皮带等部件。
5, equipment operation, the operator shall not leave the equipment, shall not be close to or touch the high speed rotating spindle, belt and other components.
6、设备切割过程中要经常观察喷雾润滑的效果，这对铣刀的耐用程度和切割型材的断面精度影响很大。
6, equipment cutting process should often observe the effect of spray lubrication, which on the durability of the milling cutter and cutting section of the profile accuracy greatly affected.
7、更换刀具时，应带好手套，避免皮肤接触锋利的刃口而受伤。换上的刀具要检查有无损坏、变形。严禁使用变形和损坏的刀具。换下的刀具要做好妥善处理。
7, replace the tool, should bring gloves, avoid touching the sharp blade and injured. Replace the tool to check for damage or deformation. Use of deformed and damaged cutters is strictly prohibited. Change the tool to be properly handled.
8、开机前和运转过程中要定期给导轨注油，（1次/2小时），注油。定期注油对设备的耐用性和加工精度非常必要。
8, before starting and running process should be regularly to the rail oiling, (1 /2 hours), oiling. Regular oiling is essential for the durability and machining accuracy of the equipment.
9、设备在维修时应切断设备电源，并选择具有专业资格的人员维修。
9, equipment should be cut off in the maintenance of equipment power, and select professional qualifications of personnel maintenance.
10、工作完成后，要对设备进行彻底清扫，并对各运动部件注润滑油。
10, after the completion of the work, the equipment should be thoroughly cleaned, and the moving parts are injected with lubricating oil.
1, the operator has not been trained, and qualified personnel shall not operate the equipment.
2、操作人员在操作本设备前应穿戴好劳保护品，袖口扎紧。长发需扎到工作帽内。严禁戴手套作业，严禁佩戴各种影响操作的饰品。
2, the operator should wear PPE in the operation of this equipment, cuffs fastened. Long hair needs to be stuck into the work cap. Wearing gloves is strictly prohibited. Wearing all kinds of jewelry is strictly prohibited.
3、开机前认真检查设备各部位，严禁有妨碍操作的物品，工件必须固定牢固。
3, before starting, carefully check the parts of the equipment, are strictly prohibited to impede the operation of the goods, the workpiece must be fixed firmly.
4、开机前应确定刀具的旋转方向，方向正确才能继续操作，否则更正后在操作。
5、设备运转中操作人员不得离开设备，不得靠近或触摸高速旋转的主轴、皮带等部件。
5, equipment operation, the operator shall not leave the equipment, shall not be close to or touch the high speed rotating spindle, belt and other components.
6、设备切割过程中要经常观察喷雾润滑的效果，这对铣刀的耐用程度和切割型材的断面精度影响很大。
6, equipment cutting process should often observe the effect of spray lubrication, which on the durability of the milling cutter and cutting section of the profile accuracy greatly affected.
7、更换刀具时，应带好手套，避免皮肤接触锋利的刃口而受伤。换上的刀具要检查有无损坏、变形。严禁使用变形和损坏的刀具。换下的刀具要做好妥善处理。
7, replace the tool, should bring gloves, avoid touching the sharp blade and injured. Replace the tool to check for damage or deformation. Use of deformed and damaged cutters is strictly prohibited. Change the tool to be properly handled.
8、开机前和运转过程中要定期给导轨注油，（1次/2小时），注油。定期注油对设备的耐用性和加工精度非常必要。
8, before starting and running process should be regularly to the rail oiling, (1 /2 hours), oiling. Regular oiling is essential for the durability and machining accuracy of the equipment.
9、设备在维修时应切断设备电源，并选择具有专业资格的人员维修。
9, equipment should be cut off in the maintenance of equipment power, and select professional qualifications of personnel maintenance.
10、工作完成后，要对设备进行彻底清扫，并对各运动部件注润滑油。
10, after the completion of the work, the equipment should be thoroughly cleaned, and the moving parts are injected with lubricating oil.
下一条
断桥铝门窗加工设备安装药店
