防止塑钢门窗设备过早老化要怎么做？

遇到潮湿的天气，应该用干的抹布，将塑钢门窗设备受潮的地方抹干，保证塑钢门窗设备滑槽干净干燥，由于时间长久滑槽的摩擦力会增加，可以用少些的润滑剂，比如：机油、蜡油等，将塑钢门窗机器的插槽润滑，减少其摩擦阻力。经常检查塑钢门窗机器的其他部件，定期的添加润滑油，保持干燥洁净。
In wet weather, should use dry cloth, plastic steel doors and windows equipment will damp places wipe dry, ensure the equipment of plastic steel doors and windows chute clean and dry, due to increased friction for long time slot, can use less lubricant, such as oil, wax oil, lubricating machine will slot steel doors and windows, reducing the friction resistance. Often check the other parts of the plastic steel door and window machine, add lubricating oil regularly to keep dry and clean.
经常检查塑钢门窗设备零件的整合之处，如果有松动的地方，塑钢门窗设备应该及时拧紧。密封毛条和玻璃胶封对保温起着关键作用，要时常检查，如果有脱落的要及时修补或者更换。

The integration of the parts of the plastic steel doors and windows is often checked. If there is a loose place, the equipment of the plastic steel doors and windows should be tightened in time. Sealed wool and glass sealing play a key role in heat preservation, and should be checked regularly, if the shedding should be repaired or replaced in time.

塑钢门窗设备在使用中，开启或者关闭的时候动作要轻，自然的推拉，切不可很用力气的推拉塑钢门窗设备，这样不仅费了力气，还对塑钢门窗机器使用寿命造成一定减损。
Plastic steel doors and windows equipment in use, open or close when the action is light, natural push and pull, can not be very strong push and pull plastic steel doors and windows equipment, which not only costs much effort, but also on the plastic steel doors and windows machine life will cause certain damage.
其次，要经常使用专门清洗塑钢门窗设备的工具清洗门窗，这样门窗既美观，又不会因推拉槽中积满灰尘而导致门窗难推难拉。还有就是在清洗塑钢门窗机器时的注意，应该使用柔软的布粘些中性的洗洁精来清洗，千万不要用家里常用的肥皂或者洗衣粉等一些酸碱性很强的清洁剂清洗，其原因主要是因为塑钢门窗设备其中含有金属元素。
Next, we should constantly clean doors and windows with special tools for cleaning plastic steel doors and windows, so that doors and windows can be beautiful, and doors and windows will not be pushed and pulled. There is in the cleaning machine of steel doors and windows, should use soft cloth stick some neutral detergent to wash detergent, do not use the commonly used home soap or washing powder such as pH is very strong, the main reason is because of the presence of metals in the equipment of plastic steel doors and windows.