做中空玻璃需要哪些设备的配合？

1. 玻璃切割、磨边
1. glass cutting, edge grinding
玻璃的切割设备应将所用玻璃按其尺寸、形状进行切割成形。玻璃磨边设备应能将玻璃切割后产生的锋利边沿和微裂纹磨削，并保证玻璃尺寸和边部质量符合标准。
The glass cutting equipment should be used to cut and shape the glass used in its size and shape. The glass edge equipment should be able to grind the sharp edges and micro cracks of the glass after cutting, and ensure that the glass size and edge quality conform to the standard.
2. 中空玻璃生产线
2. hollow glass production line
中空玻璃生产线具有清立式中空玻璃平压生产线能完成如下功能：玻璃清洗、干燥、合片、辊压、翻转等功能。在线全自动打胶机具有涂密封胶的功能。中空玻璃设备（内外合片）总共分7段，分别为入料段、清洗干燥段、检查传送段、上框段、合片段、板压段、翻转台。
Hollow glass production line with clear vertical hollow glass production line can complete the following functions: glass cleaning, drying, closing, rolling, flip and other functions. The online full automatic glue machine has the function of coating sealant. The hollow glass equipment (internal and external joint) is divided into 7 parts, which are feed section, cleaning and drying section, inspection transfer section, upper frame section, combined segment, plate pressure section and turn over stage.

（一）中空玻璃入料段、清洗干燥段、检查段、合片段结构及性能特点四段均以相同的倾角立式安放，结构紧凑、经济实用、效率高、维护方便。

(1) the four sections of the hollow glass feeding section, cleaning and drying section, inspection section and combined segment are all vertically placed on the same inclination angle. The structure is compact, economical and practical, high efficiency and convenient maintenance.
（二）中空玻璃板压段主要用于中空玻璃的压合。应能保证丁基胶或其他形式的间隔条与玻璃均匀、紧密粘结，同时玻璃、间隔框（条）准确定位，合片压力应均匀作用在玻璃板面上。
(two) the hollow glass plate pressure section is mainly used for the compression of the hollow glass. It should be able to ensure that the butyl rubber or other forms of spacers are evenly and tightly bonded to the glass, while the glass and spacer frame are positioned accurately, and the bonding pressure should be evenly distributed on the glass panel surface.
（三） 中空玻璃翻转台结构及性能特点翻转台的功能是把压合好的中空玻璃从垂直翻至水平。
(three) the structure and performance characteristic of the hollow glass flip table, the function of the overturn table is to turn the insulating glass from vertical to horizontal.
3. 丁基胶涂布机
3. butyl rubber coating machine
丁基胶涂布机应能保证出胶均匀，不漏胶、不断胶，能使挤出的丁基胶条均匀涂布在间隔条上。
Butyl rubber coating machine should be able to ensure uniform glue, no leakage of glue, continuous glue, can make the extruded butyl rubber strip evenly coated on the spacer.
4. 分子筛灌装机
4. molecular sieve filling machine
分子筛在使用时必须相对密封。灌注分子筛的成框必须在45分钟内合片使用。分子筛灌装设备应能顺利将分子筛灌入铝条内部，并能保证分子筛的密封要求；
Molecular sieves must be relatively sealed in use. A frame perfusion molecular sieve must be used in 45 minutes time piece. The molecular sieve filling equipment should be able to fill the molecular sieve into the aluminum strip and ensure the sealing requirements of the molecular sieve.
5. 双组份打胶机
5. double component glue machine
双组份打胶机应能保证按要求的混合比例稳定可调、充分均匀混合；单组份打胶机出胶应均匀；胶枪易清洗、存放。涂胶后的中空玻璃，应逐片隔开静置固化，固化后才能包装、搬运。
A two-component glue machine should be able to guarantee the stability of the mixing ratio by adjustable, fully and uniformly mixed; one component glue machine glue glue gun should be uniform; easy cleaning and storage. After coating, the hollow glass should be statically solidified by piece by piece, and can be packed and transported after curing.
以上就是为大家介绍的有关移门生产设备http://www.szwmdjx.com的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以最专业的态度,为您提供服务.
The above is to introduce the sliding door production equipment http://www.szwmdjx.com detailed introduction, I hope to help you. What if you have questions, please contact us. We will offer the most professional attitude to serve you.