断桥铝门窗的三方面的调试问题

1电力方面
1 electric power
电压380V是一般的断桥铝门窗设备的正常的电压，频率50Hz，因此，火线和零线之间的连接就需要注意了。火线和零线要连接好，不然可能会引发事故。这个一般来讲，大多数的门窗设备厂家通过颜色分辨，火线为黑色或者蓝色，零线为红色。如果火线接反了，只需要将两根换过来就好了。
The voltage 380V is the normal voltage of the broken bridge aluminum door and window equipment, the frequency is 50Hz, so the connection between the fire line and the zero line needs to be paid attention to. The fire line and the zero line should be connected well, or it may cause an accident. Generally speaking, most door and window equipment manufacturers are distinguished by color, the fire line is black or blue, and the zero line is red. If the fire line is back, just change the two.
2供气方面
2 gas supply aspects

由于门窗设备的压料要保证充足的供气量，这样就能更好的使用了，这是基础，来实现气缸压紧。正常情况下，门窗设备的供气量和气压都是有固定的参数要求的，即供气流量要达到0.3，气压也要能够达到8个压。在有多个门窗设备的情况下，这就需要多准备一些储气罐，这个根据现实情况而定。如果气压达不到，门窗加工设备的精确度就会进出产生相应的一些影响，相应地加工效果也会发生一些偏离预想的现象。

Due to the pressure of the door and window equipment to ensure adequate supply of gas, this can be better used, this is the foundation to achieve cylinder pressure. Under normal circumstances, air supply and volume and air pressure of doors and windows equipment have fixed parameter requirements, that is, the flow rate of the gas supply should reach 0.3, and the air pressure should also achieve 8 pressures. In the case of more than one door and window equipment, it is necessary to prepare more gas storage tanks, depending on the reality. If the air pressure is not enough, the accuracy of doors and windows processing equipment will go in and out, and some corresponding effects will also happen.
3设备方面
3 equipment aspects
断桥铝门窗设备种类很多，每一种设备又会有多种型号，或者多种设备部位不同等等。所以在门窗设备的安装调试方面，需要协调好各个区域的工作，把握好每一个世界，这样调试起来就不会出问题了。
There are many kinds of aluminum doors and windows in the broken bridge, and each kind of equipment will have many types, or different parts of the equipment. Therefore, in the installation and commissioning of door and window equipment, we need to coordinate every region's work and grasp every world well so that we will not be able to go wrong after debugging.
以上内容就是铝切割设备为大家整理的分享，更多的精彩内容请进入：http://www.szwmdjx.com  我们会有专人为您解答，你的支持是对我们工作更好的支持！
The above is the aluminum cutting equipment for you to share, more wonderful content, please enter: http://www.szwmdjx.com, we will have someone to answer for you, your support is better support for our work.