立式中空玻璃生产线的常见问题总结

立式中空玻璃生产线的故障其时是很少的，我们在判断电与气路方面的故障时先采用手动方式进行检查，再根据实际发生情况来解决问题。
The failure of vertical hollow glass production line is very small at the moment. When we judge the faults in the electric and gas path, we first use manual way to check it, and then solve the problem according to the actual situation.
a.故障：板压进入块玻璃后，侧定位没有起来，玻璃出来一部分后在板压内停止。板压不压合。 原因：板压计数开关未计上数。
A. failure: after the plate pressure enters the first glass, the side position does not rise, and the glass stops in the plate pressure. The plate pressure is not pressed and closed. Reason: the board pressure count switch is not counted.
b.故障：板压进入块玻璃后，侧定位没有起来，玻璃出来一部分后在板压内停止。板压压合，下定位托起。原因：手动检查侧定位是否起做用。
B. failure: after the plate pressure enters the first glass, the side position does not rise, and the glass stops in the plate pressure. Press and press the plate. Reason: check whether the side position is used manually.
c.故障：板压进入块玻璃后，侧定位没有起来，玻璃出来一部分后板压输送轮未停止。原因：检查板压内检测开关

C. failure: after the plate pressure enters the first piece of glass, the side position is not up, and a part of the rear plate pressure conveyer wheel is not stopped. Reason: check switch in check plate
d.故障：板压进入块玻璃后，压合完后不回来，未听到吸盘吸合的声音。原因：检查板压里面的小区域微动开关。
D. failure: after the plate pressure enters the first piece of glass, it does not come back after the pressure is finished, and the sound of the suction cup is not heard. Reason: check the minimum area microswitch in the plate pressure.
e.故障：1800丝杠型生产线在回参过程是到位不停止。原因：丝杠线回参一定要先将板压张开过板压减速开关点，再进行回参。检查在回参过程中回参点与减速点的接近开关是否有信号。
E. fault: the 1800 screw type production line is not stopped in the return process. Reason: the screw thread back parameter must first open the plate pressure to slow down the switch point, and then return the reference. Check whether there is a signal on the close switch of the return point and the deceleration point during the return parameter.
更多的关于移门生产设备的问题或者详细的内容，请进入我们公司的网站：http://www.szwmdjx.com/网站中会有很多的内容仅供参考。
A sliding door production equipment more questions or details, please enter our website: http://www.szwmdjx.com/ website will have a lot of content is for reference only.