中空玻璃生产线设备的操作保养技巧

一、熟读操作说明书。说明书或者是指导流程是一定要看一下的，上面有很多细节和技术指导，每一道工序都有需要注意的地方，而这些细节我们都在说明书上一一列举出来了，所以说熟读了说明书就是掌握了操作宝典，也可以避免由于操作不当给机器或者是玻璃造成的损失。
First, read the operating instructions. The instructions or guidance process is sure to look, there are a lot of details and technical guidance, every process need to pay attention to the place, and we are all these details in the manual list, so read the instructions is to master the operation of Bao Dian, also can avoid the improper operation of the machine or is the loss caused by the glass.
二、学会应急处理。应急处理是十分必要的，在操作过程中很有可能会出现突发情况，这个时候我们要及时的按下停止的按钮，或者是关闭电源。应急处理是对机器最好的保护，因此学会喊停比学会操作更加重要。
Two. Learn to deal with emergency. Emergency response is very necessary, in the operation process is likely to occur suddenly, at this time we should press the stop button in time, or turn off the power supply. Emergency treatment is the best protection to the machines, so learn to stop operation is more important than to learn.
三、注意安全。不要用手触碰机器上带点的部件，因为玻璃清洗机是液态的操作环境，如果随意触碰带电部件可能会导致触电，如果真的发生了安全事故，后果是十分严重的。操作人员需要自己具备安全意识，同时注意按照规则进行操作，这也是对自己负责。

Three, pay attention to safety. Don't touch the machine with the hand parts, because the glass cleaner is a liquid operating environment, if you touch the live parts may cause electric shock, if there is a real safety accident, the consequences are very serious. Operators need to have their own security awareness, at the same time pay attention to the operation according to the rules, which is responsible for themselves.

四、保护机器。为了方便运输，玻璃清洗机上会有传送带帮助清洗部件，建议不要放置不需要的物品在传送带上，这会对机器带来损伤，因此需要大家稍稍注意来保护机器，增加玻璃清洗机的使用寿命。
Four, protect the machine. In order to facilitate transportation, the glass washing machine will have a belt to help clean parts, it is recommended not to put unnecessary items on the conveyor belt, which will damage the machine, so we need to pay attention to protect the machine, increase the service life of glass cleaning machine.
保养措施：
Maintenance measures:
1、保持滑轮各方面的润滑。
1. Keep the lubrication of all aspects of the pulley.
2、保持电压的稳定,防止电器的烧毁。
2, keep the voltage stability, prevent the burning of electrical appliances.
3、在运行过程中若有异常情况应立即停车检查.排除故障后再重新启动。
3. If there is any abnormal situation in the operation process, the parking should be checked immediately, and then restart after troubleshooting.
4、为保证机器的良好运行,应加强机器日常维护与保养。
4, in order to ensure the good operation of the machine, should strengthen the routine maintenance and maintenance of the machine.
5、中空玻璃设备出现较大的的故障时应有专业人士来维修,在开始检修前切忌关掉总电源。
5, the larger failure of the insulating glass equipment should be professionals to repair, before starting the overhaul must not turn off the total power supply.
6、传动的维护要注意各传送辊轴承、毛刷辊轴承、传送轴承、链轮、齿轮定期加注钙基润滑脂.微型摆线针轮减速机每半年加钙基润滑脂一次。
6, the transmission maintenance should pay attention to the transmission roller bearing, brush roller bearing, transmission bearing, sprocket, gear regularly add calcium based grease. Micro cycloid reducer reducer every half a year grease.
本文由移门生产设备提供技术支持，更多的详细精彩内容请点击我们的官方网站http://www.szwmdjx.com/，我们将会全心全意为您提供满意的服务。
This paper consists of sliding door production equipment to provide technical support, with more exciting content, please click on our official website http://www.szwmdjx.com/, we will wholeheartedly provide you with satisfactory service.