断桥铝门窗设备使用效率的介绍

断桥铝门窗设备在削、铣削铝工件件时,进给速度,主轴转速,切削深度等切削用量通常都没有办法断定，一些有经历的师傅便凭着对机器的感受和切开声响的改动来断定这些。
The aluminum doors and windows and milling equipment in aluminum workpiece parts, feed rate, spindle speed, cutting depth and cutting parameters are usually not to know some experienced master with the machine's feelings and to determine whether these changes open sound.
材料的切开速度是，在对工件的抱负条件下，每齿进给量=每转进给量/齿数依据加工目标的材料等断定每齿(即每刀)进给量,首要思考刀具能接受的线速度,零件尺度,外表粗糙度的需求,切深等.结尾断定主轴转速,切削深度,进给量。其“抱负”切开速度假定尖利的东西和足够的冷却液。不一样材料有不一样的切开速度，并能够在不一样的利率减少作业。此外，一些东西或进程（如线程，滚花，或切开）将需要比切开速度较慢的速度作业。
Cut the speed of the material is in the workpiece under the condition of ambition, feed per tooth feed / = per material basis for processing the target number of teeth per tooth (each knife that) feed, priority tool can accept line speed, parts scale, surface roughness requirements, cutting depth etc. sure. At the end of the spindle speed, cutting depth, feed rate. Its "ideal" cut speed assumes a sharp thing and enough coolant. Different materials have different cutting speeds and can reduce operations at different rates. In addition, some things or processes (such as threading, rolling, or cutting) will need to work at a slower rate than the opening.
断桥铝门窗设备铝合金加工刀具也是很有学识的，通常加工铝件首要思考的是外表质量和加工功率。
Broken bridge aluminum door and window equipment, aluminum alloy cutting tool is also very knowledgeable, usually processing aluminum parts, the main consideration is the appearance quality and processing power.

进给率（铝切机车床）是指以车床东西大概怎么疾速移动被切开的材料。 这是运用特别材料的每转进给核算。车刀通常都只要一个牙齿，因而，在大多数情况下，FPT和FPR将是一样的。 进给率将减少烦闷的东西，冷却液/光滑缺乏，或进一步减少。进给率=（转速x进每齿牙切开数）
Feed rate (aluminum cutting machine lathe) refers to the lathe things about how fast moving to be cut material. This is the use of special materials for each turn feed accounting. A lathe tool usually has only one tooth, so in most cases, FPT and FPR will be the same. Feed rate will decrease by dull stuff, coolant / smoothness, lack, or further decrease. Feed rate = (RPM x into the number of teeth per tooth)
进步切削速度能够进步加工功率，能够下降制作本钱。一类刀具遍及选用小的主偏角以下降径向切削力对刀具变形的影响，然后能够将非常大的进给用于实践加工，进步切削功率。
Progressive cutting speeds increase machining power and reduce manufacturing costs. A kind of cutter is widely used below the small main angle of deflection. The effect of radial cutting force on the tool deformation is reduced, and then the very large feed can be used for practical processing, and the cutting power can be improved.
相信看了本文的移门设备http://www.szwmdjx.com/介绍后，对这方面也会有自己的一番认识，以后针对的等问题也能很好的解决。
You see the door equipment http://www.szwmdjx.com/ introduced, will also have a new understanding of the problems in the future, also can be a good solution.