中文
+ 更多 联系我们
联系我们

苏州威利诺机械设备有限公司

联系人:王经理

手机:15906136866

电话:0512-68136800

传真:0512-68136800

地址:吴中区横泾镇兴巷路2-1号

行业资讯

断桥铝门窗设备原材料使用规范标准

2018-03-12 点击数:1186
在断桥铝门窗安装登门窗发泡剂动工后,要趁早将门窗的铁脚施行掩埋。用砼或沙浆封锚脚,干固后,抽去斜木,那里面窗沿要用C20细砼浇捣,而后行粉刷。动工时要保证洞口周边的粉刷品质。
In the aluminum doors and windows installed on doors and windows of foaming agent after the start, as early as possible the doors and windows of the iron feet as buried. With concrete or mortar anchor seal foot, dried, smoked deramping wood, the window with C20 fine concrete pouring, and then paint. Work to ensure the quality of the whitewash around the hole.
洞口过梁水准度扼制在1.5‰,全长不超过3mm,洞口铅直度扼制在1.5‰。粉刷后注意增强养护,避免粉刷层裂隙而渗水。断桥铝门窗设备厂的技术觉的,门窗是一栋房子的窗口,是很重要的一部分,如果安装不好呢会影响保温的效果,还会漏水,会造成很严重的效果,断桥铝门窗设备原材料使用标准规范:
The level of control in the lintel 1.5 per thousand, total length of not more than 3mm, the vertical degree of control in 1.5 per thousand. After the painting, pay attention to strengthen the maintenance, to avoid the crevice of the brush layer and water seepage. The technology and windows of a broken bridge aluminum door and window equipment factory is a window of a house. It is a very important part. If the installation is not good, it will affect the effect of heat preservation, and it will also leak. It will cause serious effect.
1、框材总的要求应该是强度好,隔热性能好,易制做成各种造形,又要易于回收和有利于环境保护。
1, the general requirements of the frame material should be good strength, good heat insulation, easy to make all kinds of shape, and easy to recover and be conducive to environmental protection.
2、玻璃应该推广使用中空玻璃,而且在北方应推广使用Low-E型(低辐射)中空玻璃。

2, glass should be extended to use hollow glass, and the Low-E (low radiation) hollow glass should be popularized in the north.

铝切割设备

3、推广使用双道密封和用聚硫中空玻璃胶制做的中空玻璃,中空玻璃间隔条应采用连续弯角式结构,如果用四角插接式的,在接头处必须用丁基胶作密封处理。
3, we should extend the use of double channel seal and hollow glass made from polysulfide hollow glass glue. The spacer bar should be constructed with continuous bending angle structure. If we use four angle socket type, we must use butyl rubber as sealing treatment at the joint.
4、断桥铝合金门窗加工必须实现精品化;因为只有这样,才能使其具有良好的使用性能和较好的环境美化作用。
4. The processing of aluminum alloy doors and windows of the broken bridge must be refined, because only in this way can it have good use performance and better environmental beautification.
据断桥铝门窗设备厂家介绍,隔热断桥铝门窗设备的热传导系数K值为3W/m2.K以下,热传导性比非隔热铝合金型材门窗降低40%~70%,降低取暖费用30%左右,隔声量达35分贝以上,水密性、气密性良好,均达国家A1类窗标准。
According to the introduction of the aluminum doors and windows equipment manufacturers, the heat conduction coefficient of K insulation aluminum doors and windows equipment value is below 3W/m2.K, the thermal conductivity of insulation than Aluminum Alloy PVC and reduce 40%~70%, reduce heating costs about 30%, amounted to more than 35 decibels of sound insulation, water tightness, good air tightness, reached the national standard A1 window class.
以上的知识由铝切割设备 http://www.szwmdjx.com 提供,我们公司将秉承诚信合作,共赢发展的方针,面向社会提供服务,感谢您的光临!
The above knowledge provided by aluminum cutting machine http://www.szwmdjx.com, our company will uphold the integrity and win-win cooperation and development policy, to provide services for the community, thank you for your visit!