铝型材切割机加工的制作流程

1、接到加工单后,必须理解加工图图意,复查其图所指的各数据与单内数据是 否相吻合,在吻合的条件下,再进行材料领料手续，有疑惑的情况及时的反馈给 上级主管。
1, received a single processing, must understand the meaning of the data processing Tutu, review the figure referred to in the data is consistent with the single, in consistent conditions, then the material warehouse, confused situation timely feedback to supervisor.
2、按单内所指领用材料型号、规格、颜色由仓管员认可签字后，按单内数量查实后领料，领料前先检查铝型材规格、外观质量：外表面不得有腐蚀、氧化缺陷及划伤，弯弧型材需要检验员检验合格后方可领出加工。
2, according to the single within the meaning of material used for models, specifications, color tube signed by the warehouse after the material according to the single quantity check, first check the aluminum material specifications, appearance quality: outer surface without oxidation corrosion, and scratch defects, curved sections need inspector inspection qualified rear can out of processing.

3、锯切常规度角铝型材：用双头铝切机按锯床的操作规程要求调试锯床，根据型材套料表试锯1支做到自检所做的长度、角度、表面等各方面的检查后才能批量锯切。 锯切小余45度或大余135度角铝型材：先用双头锯断材料再用单头角度铝型材切割机根据图纸内所标的角度，调试锯床试锯1支做到自检所做的长度、角度、表面等各方面的检查。

3, sawing the regular angle aluminum profile: double head aluminum cutting machine debug the sawing machine according to the operation rules of the sawing machine. According to the section saw, 1 saws, do the inspection of length, angle, surface and other aspects after self inspection, and then batch sawing. Sawing 45 or 135 degree angle aluminum profile: first use double head sawing material, then use single angle aluminum profile cutting machine, according to the angle of the drawings, debug sawing machine 1 saws, do self inspection of length, angle, surface and other aspects of inspection.
4、根据图纸要求需要钻铣槽口的加工件锯切后，用产品转运车将产品转运到数控加工的加工区内，再进行钻孔或铣槽。对于槽口少或相对简单的加工件，可以在普通钻铣床上进行钻铣槽口时需要按锯钻铣床的操作规程要求调试钻铣床再进行加工操作。 在加工钻铣槽口前要做到互检程序要求，检查前道工序的加工件是否存在错误，杜绝不合格产品出现，同时也做好自检要求不让不合格产品进入下道工序。
4, according to the requirements of the drawings, we need to drill and milling the slot parts after sawing, then transfer products to the numerical control processing area with the product transfer car, then drill or groove. For machining parts with few or relatively simple notches, drilling and milling grooves on common drilling and milling machines need to debug drilling and milling machines and do processing operations according to the operation rules of saws and milling machines. Before processing drilling and milling notch, we must do mutual inspection procedure requirements, check whether there are errors in the processing parts of the preceding process, eliminate the unqualified products, and do well in the self inspection requirements, so that the substandard products will not enter the next process.
5、加工完成后的产品，用产品转运车将产品转运到产品待检区进行产品检查，质检员按图纸根据产品检测规范要求检查产品，确保出厂产品的合格率为。
5, after the completion of processing products, products for transport vehicles to transport the products products quarantine product inspection, inspectors according to the drawings according to the specification for the testing of product requirements to check the products, to ensure the qualified rate of products is .
6、检查合格产品，用产品转运车将产品转运到产品包装区进行产品包装，要根据产品表面的处理方式选用保护膜，包装时要将保护膜平整的粘贴在产品上，不能有太多的气泡否则保护膜容易掉落。包装时对产品要轻拿轻放避免在包装时对产品划碰。
6, inspection of qualified products, products for transport vehicles to transport the products in product packaging product packaging, to choose the way of dealing with protective film on the surface of the product, to protect the smooth film packaging of paste in the product, not too many bubbles or protective film is easy to drop. When packing, the product should be light and light to avoid touching the product in the packing.
7、产品检查保护后，贴上产品合格证按入库单的数量入库。再由仓库管理员按计划发送到客户指定的地方。
7. After the inspection and protection of the product, the product qualification certificate is put into the warehouse according to the quantity of the entry form. It is then sent by the warehouse administrator to the designated place of the customer.
本文由铝切割设备进行编写，想要了解更多的产品及更详细的精彩内容，请关注我们的官方网站：http://www.szwmdjx.com/
This paper is written by the aluminum cutting equipment. If you want to know more products and more detailed highlights, please pay attention to our official website: http://www.szwmdjx.com/.