铝材设备的设计的条件及保养标准

2017-11-22 点击数：1623

条件一：使用性能设计

Condition 1: Performance Design

设计设备的时候想要保证其使用性能，首先要保证的就是设备的加工方式，而且在加工的过程当中不能消耗太多的加工材料，比如需要切割铝材的时候，设备完成标准工作之后，还要保证铝材不能开边，切割的痕迹一定要非常整齐，铝材的结构不能被破坏;当然这跟设备使用度也有很大的关联，度越高，设备使用起来就越灵活。

When design equipment to ensure its performance, we must first ensure that the processing equipment is, and can not consume too much material in the processing process, such as when cutting aluminum, after equipment to complete the standard work, but also to ensure that the aluminum material can not open edge, cut marks must be very neat the structure is not destroyed, aluminum; of course with this equipment using precision also have great relevance, the higher the accuracy, the equipment to use more flexible.

条件二：驱动方式设计

Two conditions: drive mode design

现如今的行业市场当中大多设备都是用了电动驱动的方法，所以在设计的时候电机的质量一定要过关，因为电动驱动的方法不仅能在很大程度上节约使用成本，同时还能降低设备的噪音，并且这种设备能够移动，所以保存起来很方便。

Is now the market most devices are used for electric drive, so the quality of motor in the design must pass, because the method of electric drive can not only greatly save cost, but also reduce the equipment noise, and this device can move, so keep it convenient.

条件三：设备质量水平

Three conditions: equipment quality level

在生产的过程当中设备的生产材料选择以及生产工艺水平都时刻影响着设备的价值，在设计这种设备的时候，大家需要认真确定生产材料和生产工艺。

In the process of the production equipment, production materials and production technology level is constantly affected by the value of the equipment, in the design of this equipment, we need to carefully determine the production materials and production process.

保养标准：

Maintenance standards:

使用的过程当中一定要进行定期的检查，因为这种设备的工作负荷非常大，长时间的使用会对设备的每个零件造成磨损，及时的检查能够有效的发现磨损比较严重的零件，并及时更换，对于设备的正常运行有很大的帮助。

A process using the to carry out regular checks, because of the very large workload of this equipment, the use of long time will each part of the equipment caused by wear, timely inspection can wear more serious parts effectively, and timely replacement, there is a great help for the normal operation of equipment.

由于设备内部的电子元件众多，所以使用环境一定要通风干燥，不能放在潮湿的环境当中，因为这样会造成设备内部线路板短路，从而影响设备质量，给设备造成损坏。

Because the electronic components inside the device are numerous, so the use of the environment must be ventilated and dry, can not be placed in a humid environment, because it will cause the circuit board internal short-circuit equipment, thus affecting the quality of equipment, equipment damage.

这就是工业铝材设备的相关介绍，其实在使用的过程当中，如果想要保证设备在使用过程当中发挥的价值，不仅要在选择的时候，保证设备的质量和所拥有的价值，还要在使用的过程当中，注意使用的方法以及使用时对设备的保养。

This is the introduction aluminum industry equipment, in fact, in the process of using, if you want to ensure the equipment to maximize the value of the use of the process, not only at the time of selection, ensure the quality of the equipment and have value, but also in the use of the process when, the attention of maintenance on the equipment using the method and when in use.

上一条铝合金门窗设备双头切割锯操作流程

下一条保养断桥铝门窗设备在“冬季”要求

手机站二维码