铝门窗设备使用前需要做好检查

一、设备方面.由于断桥铝门窗设备分类众多,每种设备可能都有好几款机器.对于门窗设备的检查尤为重要,比如切割锯的气管插头、锯片进出速度、锯头左右工作状态等等.
One, equipment. Because of the large number of equipment classification of the broken bridge aluminum doors and windows, each kind of equipment may have several machines. It is particularly important for the inspection of the door and window equipment, such as the cutting plug of the cutting saw, the speed of the saw blade, the working state of the saw head and so on.
二、电力方面.由于断桥铝门窗设备常用电压时380V的,所以大家在接线的时候一定要注意火线和零线的连接.这个一般来讲,门窗设备厂家都会分出眼色,火线为黑色或者蓝色,零线为红色(各个工厂根据自己的情况而定).如果火线接反了,就在火线的两端随便倒换两根即可.
Two, electric power. Because of the broken bridge aluminum door and window equipment commonly used voltage 380V, so we must pay attention to the connection of the fire line and zero line when the connection. Generally speaking, the door and window equipment manufacturers will distinguish the color, the fire line is black or blue, the zero line is red (depending on the condition of each factory). If the fire line is connected, You can change two at both ends of the fire line.

三、气源方面.由于断桥铝门窗设备的压料都是气缸压紧,因此保证充足的供气量是设备高效使用的一个前提.如果,气压达不到,铝型材双头切割锯的锯片进出就会受到影响,相应地加工效果也会受到影响.一般来讲,一套断桥铝门窗设备要保证气压能够达到8个压,供气流量达到0.3.如果设备过多,仅仅靠气泵是不够的,需要大家准备一两个储气罐.

Three, gas source. Because the pressure of the equipment of the broken bridge aluminum door and window is all the cylinder pressure, so ensuring the sufficient supply is a prerequisite for the high efficient use of the equipment. If the pressure is not reached, the saw blade of the double head cutting saw will be affected and the corresponding processing effect will be affected. Generally speaking, a set of broken bridge aluminum doors and windows is set up. To ensure that the pressure can reach 8 pressure, the flow of gas reaches 0.3.. If the equipment is too large, it is not enough to rely solely on the air pump, so we need to prepare one or two gas storage tanks.
在对断桥铝门窗设备进行维护时,我们首先应根据断桥铝门窗设备说明书上所规定的技术要求性能、结构特点、操作使用规范、调整措施等,组织拟订安全操作规程,同时向操作人员提出操作使用要求的规范,并组织学习,使他们能掌握、熟知操作使用设备的具体要求和有关规定.
In the maintenance of the equipment for the broken bridge aluminum doors and windows, we should first organize the safety operation regulations according to the technical requirements, structural features, operation usage specifications and adjustment measures, as stipulated in the aluminum door and window equipment specification of the broken bridge. At the same time, we should put forward the requirements and organize the learning to the operators. Grasp and familiarity with the specific requirements and relevant regulations for operation and use of equipment.
做到断桥铝门窗设备合理使用的基本条件是:按企业产品生产的工艺特点和实际需要配备设备,使其配套成龙,布局合理、协调.要考虑主要生产设备、辅助生产设备的成套性.不然,就会产生设备之间不相适应,造成生产安排不协调,影响正常生产进行.
The basic conditions for the rational use of the equipment for the broken bridge aluminum doors and windows are that the equipment is equipped according to the technological characteristics and actual needs of the products produced by the enterprise, so that the equipment will be set up and the layout is reasonable and coordinated. The main production equipment and the complete set of auxiliary production equipment should be considered. Otherwise, the production arrangements will not adapt, resulting in the disharmony of the production arrangement and the shadow of production. Sound normal production.
感谢您的阅读，此文的文章来源：铝切割设备更多的内容和问题请点击：http://www.szwmdjx.com我们会继续努力的为您提供服务，感谢您的支持！
Thank you for your reading, the source of this article: more aluminum cutting equipment and more questions please click: http://www.szwmdjx.com we will continue to work hard for you to provide service, thank you for your support!