塑钢门窗设备生产出来的产品有哪些优势？

很多人的都喜欢使用塑钢门窗设备，导致塑钢门窗设备使用量越来越多，特别是这两年断桥铝门窗的发展， 更是增加了塑钢门窗设备的使用量，移门生产设备给大家介绍一下：
Many people love all equipment used in plastic steel windows and doors, steel doors and windows cause equipment is used more and more, especially the development of these two aluminum doors and windows, is to increase the amount of equipment of plastic steel doors and windows, doors to introduce production equipment:
气密性好：塑钢门窗设备各隙缝处均装有三元一炳胶严密封闭条，隙缝单位长度透气在2.5m3/h.m以下在有冷暖设施屋内，可充分施展空调效应，并可节省能量物质。
Good air tightness: plastic doors and windows equipment slots are equipped with a rubber seal three yuan Bing Yan closed slot, unit length below 2.5m3/h.m in the cold and warm air facilities inside, can fully display the air conditioning effect, and can save energy.
保暖性好：塑钢的热传导系数低，隔热效果比铝材优1250倍，加上有令人满意气密性，在阴冷地区尽管室外零下几十度，屋内却是另一个世界。
Good heat preservation: the thermal conductivity of plastic steel is low, the heat insulation effect is 1250 times better than the aluminum, and it has satisfactory airtightness. In the cold and cold area, although it is a few degrees below the outside, the inside of the house is another world.
耐冲击：运用特别耐冲击根据处方配药，型材在-10℃能承担1kg重锤，从1米高自由落体的冷冲击尝试不出现裂缝。

Shock resistance: use special shock resistance, according to prescription dispensing, profiles at -10 degrees can bear 1kg heavy hammer, from 1 meters high free fall cold shock, try not to crack.
<a塑钢门窗设备 width=448 height=391 src="/uploadfile/20141029131029546.jpg">
<a plastic steel door and window equipment width=448, height=391, src=, /uploadfile/20141029131029546.jpg >
耐老化：使用进口改性剂、原料中添加的紫外光借鉴剂，在-30℃至70℃之间炎热的太阳、暴雨、干燥、潮润之变动中未变色，不老化，不脆化。
Aging: the use of imported raw materials to add modifier, UV reference agent, between -30 to 70 DEG C hot sun, rain, dry and moist changes without discoloration, not aging, not brittle.

防火性好：塑钢门窗设备为良好绝火材料，不自动燃烧，不助燃、能自熄，是理想的挑选。
Good fire resistance: plastic door and window equipment is good, absolutely fire material, not automatic combustion, not combustion support, can be extinguished, is the ideal choice.
隔音性好：其结构经专心预设，接缝严紧，尝试结果，隔音≥25dB合乎DIDN4109之规定。
Good noise: the structure of the joint is tight, try to concentrate on presupposition, the final result, noise is greater than or equal to 25dB in accordance with DIDN4109 regulations.
保护调养容易：塑钢异型材不受剥蚀，又不会变黄褪色，不受灰，士敏土及胶合剂影响，几乎不需要  保护调养，脏污时，可用不论什么清洗剂，清洗后雪白如初。
Maintain easy: steel profile is not affected by erosion, they will not turn yellow fade from ash, cement and cement, almost do not need to protect the dirt, can be nursed back to health, no matter what the cleaning agent, after cleaning the white.
科学预设：塑钢门窗设备使用合理节能型材，是通过科学预设可为传统的，现代的建造生色。
Scientific preset: plastic door and window equipment uses reasonable energy saving profiles, and it can be used for traditional and modern construction by scientific presupposition.
防盗性好：塑钢门窗设备，配备布置良好金属构件，窗内预设装玻璃卡条，使盗窃者束身无策。
Good security equipment: steel doors and windows, set good metal window glass card preset, the larcener recoil free policy.
不腐蚀：塑钢门窗设备不受不论什么酸碱药物的剥蚀，不受废气及盐份的影响，十分适应沿海地区，重工业区运用。
No corrosion equipment: steel doors and windows from no matter what acid-base drugs is not affected by erosion, waste gas and salt, is to adapt to the coastal areas, heavy industrial use.
水密性好：吸水率0.1%，门窗预设有防雨板、排水槽孔，能将雨水隔绝於室外，水密性合乎DIDN18055之规定
Good water tightness: water absorption rate of 0.1%, doors and windows are preset rain proof board, drainage slot, can be absolutely isolated from outdoor rainwater, water tightness in line with the provisions of DIDN18055